Simplified Multicluster Install [Experimental]
- Before you begin
- Initial preparations
- Customizing Istio
- Creating the mesh
- Clean up
- See also

Simplified Multicluster Install [Experimental]

The following information describes an experimental feature, which is intendedfor evaluation purposes only.

This guide describes how to configure an Istio mesh that includes multiple Kubernetes clusters using a simplified experimental approach.We hope to continue developing this functionality in coming releases, so we’d love your feedback on the overall flow.

We focus here on the details of getting a multicluster mesh wired up, refer to multicluster deployment model foradditional background information. We’ll show how to connect two clusters that are on the same network together, alongwith a third cluster that’s on a different network.

Using the approach shown in this guide results in an instance of the Istio control plane being deployed in every clusterwithin the mesh. Although this is a common configuration, other more complex topologies are possible, but have to be doneusing a more manual process, not described herein.

Before you begin

The procedures we describe here are primarily intended to be used with relatively pristine clusters,where Istio hasn’t already been deployed. We hope to expand support in the future to existing clusters.

For the sake of explanation, this guide assumes you have created three Kubernetes clusters:

A cluster named cluster-east-1 on the network named network-east.
A cluster named cluster-east-2 on the network named network-east.
A cluster named cluster-west-1 on the network named network-west.

These clusters shouldn’t have Istio on them yet. The first two clusters are on the same network and havedirect connectivity, while the third cluster is on a different network.Take a look at the platform setup instructionsfor any special instructions for your particular environment.

Initial preparations

You need to do a few one-time steps in order to be able to setup a multicluster mesh:

Ensure that all of your clusters are included in your Kubernetes configuration fileand create contexts for each cluster. Once you’re done, your configuration file should include something similar to:

kind: Config
apiVersion: v1
clusters:
- cluster:
  name: cluster-east-1
- cluster:
  name: cluster-east-2
- cluster:
  name: cluster-west-1
contexts:
- context:
    cluster: cluster-east-1
  name: context-east-1
- context:
    cluster: cluster-east-2
  name: context-east-2
- context:
    cluster: cluster-west-1
  name: context-west-1

Decide on what the name of your multicluster mesh will be. Something short but memorable is your best choice here:

$ export MESH_ID=mymeshname

Decide on the organization name to use in the root and intermediate certificates created to let the clusters communicate with oneanother. This should generally be derived from your organization’s DNS name:

$ export ORG_NAME=mymeshname.mycompanyname.com

Create a working directory where to store a number of files produced during the clusteronboarding process:

$ export WORKDIR=mydir
$ mkdir -p ${WORKDIR}
$ cd ${WORKDIR}

Download the setup script to your working directory.This script takes care of creating the requisitecertificates to enable cross-cluster communication, it prepares default configuration files for you,and will deploy and configure Istio in each cluster.
And finally, prepare the mesh by running the download script. This will create a root key and certificatethat will be used to secure communication between the clusters in the mesh, along with a base.yamlfile which will be used to control the Istio configuration deployed on all the clusters:

$ ./setup-mesh.sh prep

Note that this step doesn’t actually do anything to the clusters, it is merely cresting a number of files within yourworking directory.

Customizing Istio

Preparing the mesh above created a file called base.yaml in your working directory. This file defines thebasic IstioControlPlane configuration that will be used when deploying Istio in your clusters (which will happen below). Youcan customize the base.yaml fileto control exactly how Istio will be deployed in all the clusters.

The only values that shouldn’t be modified are:

values.gateway.istio-ingressgateway.env.ISTIO_MESH_NETWORK
values.global.controlPlaneSecurityEnabled
values.global.multiCluster.clusterName
values.global.network
values.global.meshNetworks
values.pilot.meshNetworks=

These values are set automatically by the procedures below, any manual setting will therefore be lost.

Creating the mesh

You indicate which clusters to include in the mesh by editing the topology.yaml filewithin your working directory. Add an entry for all three clusters such that the file willlook like:

mesh_id: mymeshname
contexts:
  context-east-1:
    network: network-east
  content-east-2:
    network: network-east
  content-west-1:
    network: network-west

The topology file holds the name of the mesh, as well as a mapping of contexts to networks.Once the file has been saved, you can now create the mesh. This will deploy Istio in everycluster and configure each instance to be able to securely communicate with one another:

$ ./setup-mesh apply

To add and remove clusters from the mesh, just update the topology file accordingly and reapply the changes.

Whenever you use setup-mesh.sh apply some secret material may be created in your working directory, in particular some private keys associatedwith the different certificates. You should store and protect those secrets. The specific files to safeguard are:

certs/root-key.pem - the root's private key.
certs/intermediate-*/ca-key.pem - intermediates' private keys

Clean up

You can remove Istio from all the known clusters with:

$ ./setup-mesh.sh teardown

Simplified Multicluster Install [Experimental]

Simplified Multicluster Install [Experimental]

Before you begin

Initial preparations

Customizing Istio

Creating the mesh

Clean up

See also